Автордың жарияланымдары
ABDULLAH, O.I.
Барлық жарияланымдар
93
Белсенділік жылдары
6
Жарияланым түрлері
5
2026 (8)
- Numerical Investigation of Heat Transfer in Simultaneously Developing Laminar Flow in a Circular Pipe
- Novel CoCdFe2O4/Chitosan–PANi ternary nanocomposite for High-Efficiency Lead Removal
- A Review of Megawatt-Scale Photovoltaic Systems for Governmental Buildings: Pathways Toward Zero Grid Consumption and Environmental Sustainability
- Energy-Efficient IoT-Enabled Smart Street Lighting System with Master-Slave Node Architecture
- Optimization of braking parameters using Taguchi method and experimental validation
- Enhancing the Performance of an Indirect Solar Dryer Based on Baffle Geometry Optimization: An Experimental Study on Mint Drying Under Saharan Climate
- Laser-assisted neem oil pre-treatment: A novel pathway for high-efficiency biodiesel production
- Enhanced Thermal–Hydraulic Performance in Tubes Fitted With Energy Promoters: Effects of Geometry and Swirl Flow Generation
2025 (34)
- Enhancement of the output power of a small horizontal axis wind turbine based on the optimization approach
- Enhancing the high-cycle fatigue performance of GH4169 alloy by eliminating structural stress concentration through high-energy impact composite modification
- Investigation of the Optimization Numerical of the Design and Operational Conditions of Clutch System by Using the Integration of the Taguchi and Multi-criteria Decision-Making Methods
- Optimization of IRS Network Using Machine Learning for Enhanced Performance in Beyond 5G Network
- Grasping Stability of a Robotic Gripper with Frictional Self-Locking Mechanism
- FPGA Realization of Neural Network Accelerator for Image Classification
- Study of heat transfer through functionally graded material fins using analytical and numerical investigations
- Designing a PID Controller Using Ant Colony Optimization and Implementing It with FPGA
- effect of CaO nanocatalyst on bio-oil production from algae and date seeds via microwave-assisted co-pyrolysis
- Effect of Nozzle Diameter and Raster Angle on the Mechanical Properties of 3D Printed Nylon/ Carbon Fibers
- Investigation of the Machining Parameters and the Environment of Polyamide 6 on Surface Roughness Using Experimental and Statistical Methods
- Numerical Simulation for Simultaneously Developing Laminar Flow and Heat Transfer in a Circular Pipe
- Rotor response to unbalanced load and system performance considering variable bearing profile
- The influence of the braking disc construction on the heating of friction pair (disc–pads)
- Evaluating and Analysis of Potential Establishing Solar Power Plant in the Modern City of Bismayah, Iraq
- Diagnosing Factors (Problems) Affecting On-Site Labor Productivity—Case Study
- Sustainable Removal of Dyes from Wastewater Using Eggshell-Derived Calcium Carbonate Nanoparticles: Adsorption Isotherms, Kinetics, and Thermodynamic Analysis Supporting Sustainable Development Goals (SDGs)
- THE INFLUENCE OF THE COOLING ON THE DISC BRAKES TEMPERATURE INCREMENT FROM THE ASPECT OF TRAFFIC SAFETY
- Investigation of V2O5 and CeO2 Nanoparticles: Synthesis, Characterization, and Application in Ammonium Removal from Aqueous Solutions
- Operational Analysis of Environmental Implications of Friction Materials Based on the Taguchi Approach
- Advanced Deep Learning for Improved Fake News Detection: A BERT-Based Approach
- Investigation of effective parameters on oxygen free high conductivity copper deformation based on cutting molds design and numerical approach
- Preparation and Characterization of Vanadium Pentoxide and Nickel Oxide Nanoparticles and Their Use in Removing Tetracycline from Water
- Assessment and Analysis of Wind Energy Resources in Iraq Based on Rayleigh Model
- Advancements in AI-Based Skin Disease Diagnosis: Deep Learning Approaches for Precise Categorization and Remediation
- Study the Effect of HF Concentration at Porous Silicon (PS) Surface Preparation and Applied as NO2 Gas Sensor
- Effect of Solvent Pre-Treatment and Catalyst on Microwave-Assisted Pyrolysis of Rice Straw
- Heat Transfer Enhancement Techniques: An Overview
- An Analysis of Real-Time Applications Using CBR and HTTP as Internal Routing Protocols
- Automated Detection of Coconut Leaf Diseases Using Deep Learning Techniques
- Image Captioning Using LSTM and CNN: A Deep Learning Approach
- Wind Energy Computation Using Rayleigh-Based Energy Estimation Approach for Different Sites of Iraq
- 2E Analysis of an Earth-To-Air Geothermal Heat ExChanger Under Arid Zone
- Stress Analysis of a Small-Scale Wind Turbine Blade Based on the Numerical Approach
2024 (21)
- Advancements in gas reticulation system safety measures: a comprehensive development perspective
- SYSTEMATIC DEVELOPMENT OF AN AUTONOMOUS ROBOTIC CAR FOR FIRE-FIGHTING BASED ON THE INTERACTIVE DESIGN APPROACH
- Frictional power loss in journal bearing considering parabolic shape for the bearing edges under misalignment
- Microwave Pyrolysis of Agricultural and Plastic Wastes for Production of Hybrid Biochar: Applications for Greener Environment
- Numerical and Experimental Analyses of Developed Friction Stir Spot Welding (DFSSW) Based on Systematic Design Process Approach
- Effect of Bearing Edges Chamfering on the Characteristics of a Wide Range of Journal Bearing Ratio Under 3D Misalignment
- PERFORMANCE EVALUATION OF NONLINEAR VISCOELASTIC MATERIALS USING FINITE ELEMENT METHOD
- Effect of Nanoparticles Flow to Improve the Oil Refineries Wastewater
- A Comprehensive Analysis of the Hydrogen Generation Technology Through Electrochemical Water and Industrial Wastewater Electrolysis
- Evaluation of the Mechanical Performance and Structural Characterization of Hybrid Green Composites Based on Periploca laevigata Aiton and Wool Natural Fibers
- A COMPREHENSIVE ANALYSIS OF RADIAL THERMAL CONDUCTIVITY OF GRAIN-ORIENTED ELECTRICAL STEEL BASED ON THE INTERACTIVE APPROACH
- On the Use of Taguchi Method in the Analysis of the Dynamic Response of Variable Bearing Design under Impact Load
- Systematic Design and Simulation of a Home Stand-Alone PV System for a Located in Baghdad City
- Analysis of the Dynamic Response of Variable Bearing Design Under Impact Load Using Taguchi Method
- Finite element analysis of the thermal and thermo-mechanical coupling problems in the dry friction clutches using functionally graded material
- Technologies for high-temperature batch annealing of grain-oriented electrical steel: An overview
- Performance Investigation of Surface Modified Ceramic Microfiltration Membranes of Ionic Water Treatment
- Mathematical Modeling and Experimental Investigation of the Dynamic Response for an Annular Circular Plate Made of Glass/Polyester Composite Under Different Boundary Conditions
- An enhanced analytical and numerical thermal model of frictional clutch system using functionally graded materials
- Experimental Investigation of Thermal Effect on the Frictional Characteristics of HCC Friction Clutch Material
- Enhancement of the corrosion resistance for stainless steel 316 by applying laser shock peening
2023 (14)
- A Novel Optimization Strategy of Bearing Geometry with a Length to Diameter Ratio of 1.25 under Severe Operating Conditions Using Taguchi Method
- The influence of spoiler on the aerodynamic performances and longitudinal stability of the passenger car under high speed condition
- The impact of accidents during the transport of dangerous good, on people, the environment, and infrastructure and measures for their reduction: a review
- An Experimental Investigation and Numerical Analysis of the Thermal Behavior of a Clutch System Using the Frictional Facing of Functionally Graded Materials
- Frictional material selection of dry clutch disc based on the weighted factor and finite element methods
- An Investigation on the Teeth Crowning Effects on the Transient EHL Performance of Large-Scale Wind Turbine Spur Gears
- The influence of the brake pad construction on noise formation, people’s health and reduction measures
- Finite Element Analysis of Dynamic Behavior of NREL 5-MW Horizontal Axis Wind Turbine Blade
- Analysis of the Performance of Chamfered Finite-Length Journal Bearings under Dynamic Loads
- A study on the wind blade performance using blade element momentum theory
- INVESTIGATION OF THE INFLUENCE OF SLIDING SPEED ON THERMOELASTIC PROBLEM IN THE FRICTIONAL CLUTCH SYSTEM WHEN APPLYING A CONSTANT HEAT GENERATION
- Retraction: Numerical Study of Thermal-Structural Behavior of The Brake System Under Repeated Braking
- An investigation of the Steady-State and Fatigue Problems of a Small Wind Turbine Blade Based on the Interactive Design Approach
- Microstructural and Mechanical Characterization of Ledeburitic AISI D2 Cold-Work Tool Steel in Semisolid Zones via Direct Partial Remelting Process
2022 (12)
- Particles formation due to the wear of tires and measures for the wear reduction: A review
- Development of Hybrid Intelligent Models for Prediction Machining Performance Measure in End Milling of Ti6Al4V Alloy with PVD Coated Tool under Dry Cutting Conditions
- Particle formation due to brake wear, influence on the people health and measures for their reduction: a review
- An Investigation of Design and Simulation of Horizontal Axis Wind Turbine Using QBlade
- Dynamic performance of a series elastic actuator with variable stiffness logarithmic spiral spring
- Finite element analysis of class II mandibular unilateral distal extension partial dentures
- Minimizing Misalignment Effects in Finite Length Journal Bearings
- Experimental investigation of transient thermal characteristics of a dry friction clutch using alternative friction materials under different operating conditions
- An Investigation of the Suspension Characteristics of the Line Model of the Vehicle Using the Taguchi Method
- The Influence of the Braking Disc Ribs and Applied Material on the Natural Frequency
- Estimating Weibull Parameters Using Mabchour’s Method (MMab) for Wind Power at RAWA City, Iraq
- Intelligent Robotic Welding Based on a Computer Vision Technology Approach
2021 (4)
- Comparative on-grid solar systems winter performance analyses of different PV technologies in Baghdad weather
- Design and optimization of vertical axis wind turbines using qblade
- Three-dimensional finite element analysis of contact problem in dry friction clutches
- Analytical and numerical solutions for the thermal problem in a friction clutch system